In Line Access Unit, Type I

The core piece of the in-line control and measurement technology is the process connection fitting "In-Line Access Unit". It is primarily a two-port, straight-through housing with two lateral fittings for the connection of instruments. An exception are the nominal widths DN 10 and DN 15.

Depending on the nominal width of the In-Line Access Unit and the installation depth of the instruments, it is possible to incorporate up to two instruments in one unit.

Features:

• Can be welded into the pipe circuit
• No domes
• No pools
• Sealed gap free against the product by means of an O-ring
• Connections for instrumentation independent pipe diameter and process variables